Vatac Resilient Seated Gate Valves are available in Both Rising Stem & Non-rising Stem, standards compliance to DIN 3202 F4 or F5, AWWA C509, ASME, EN or BS. FBE Coated inside and outside to a maximise service life. Vatac Resilient seated gate valves are designed to isolate the system’s fluid. The valve wedge is fully rubberised with vulcanised rubber, those frequently occurred problems like leakage, rust etc can be avoided by using these resilient seated gate valves. Vatac Resilient Seated Gate Valves are suitable for use in drinking water and waste water, which can be installed under or above ground. Rising stem gate valves are normally used in fire service application and socket end resilient gate valves are normally used in PVC pipelines.
VATAC RESILIENT SEATED GATE VALVES MAIN DESIGNNING ADVANTAGES & FEATURES:
▲ Ductile Iron Body & Bonnet with high strength and impact resistance.
▲ Rubber Encapsulated DI wedge to ensure drop tight sealing.
▲ Rubber bonnet gasket for longevity and protection of bonnet bolts.
▲ Stainless Steel Stem with high strength and corrosion resistance.
▲ Back sealing facility to allow for replacement of seals under full operating pressure.
▲ Straight through full bore to avoid debris traps.
▲ Isolated fasteners for corrosion protection.
▲ Wiper ring to prevent impurities from entering the stem sealing system.
▲ Anti friction thrust washer for low operating torques.Integral cast in foot for safe and easy storage.
▲ Full diameter waterway Hand wheel, square cap, operation.
▲ Design and manufactured strictly in compliance to AWWA, DIN, ANSI, ASTM, BS & JIS Standards
▲ Sizes: 3" through 24"
▲ Body Styles: End connections Flanged Ends, Flanged x Machanical Joint Ends, Machnical Joint Ends, Push On Ends
▲ Pressure Class: AWWA150 B, 250B, ANSI 125, ANSI 150, PN6, PN10, PN16
▲ Actuation: Nut, Handwheel, Buried Service, Electric, Hydraulic or E-Hydraulic.
▲ Optional Top Flanges to ISO 5211, Stem Extension for Buried Services
SERVICE CONDITIONS:
▲ Temperature from-10C to 120C for EPDM seat.
▲ Temperature from-12C to 82C for NBR seat.
STANDARDS COMPLIANCE:
▲ AWWA C509, UL262, EN1171, DIN 3202 / 3352 F4 or F5, BS 4504
▲ ASME B16.10, BS EN558-1 (DIN 3202-F4 or F5)
▲ ASME B16.1 CLASS 125, ANSI/AWWA C111/A21.11, AWWA C606, EN1092-2, EN12226-1
The Vatac Resilient Seated Gate valves have been solving fluid control problems in water, potable water and general industrial applications for over 30 years. Today Vatac Technologies is putting that experience to work for you in more ways than ever before- meeting your changing needs with dependable Vatac Gate valves and accessories.
